Role of poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) in the modification of polysulfone membranes for ultrafiltration

In this study polysulfone membranes with antifouling and hydrophilic properties were synthesized using poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (AMPS) as an additive for the first time. Different wt % of AMPS was used to prepare polysulfone membranes by phase inversion method. The role of AMPS on the porosity, pore size distribution, hydrophilicity, and antifouling nature was investigated and analyzed in detail. Characterization techniques like field emission scanning electron microscope, atomic force microscopy, and imageJ software were used to characterize the morphology of prepared membranes. There is positive effect of the additive addition on all the membrane parameters like Pure water flux 101.76 L/(m² h)] (MR0) to 464.06 L/(m² h) (MR4)], hydraulic permeability 0.65 (MR0) to 2.01 (MR4)], equilibrium water content 21.74 (MR0) to 71.45 (MR4)], and porosity 0.024 (MR0) to 0.58 (MR4)]. Response surface methodology was used for the optimization of bovine serum albumin (BSA) flux and rejection. The results of the morphological as well as permeation studies depicted that permeate flux and antifouling nature were increased with the amount of AMPS present in the membrane matrix. The antifouling study of the prepared membranes was undertaken by using BSA solution of 1000 mg/L. Positive results were seen with the increase in amount of AMPS, since, the total membrane resistance has been decreased from 0.95 (MR0) to 0.74 (MR4). Separation of humic acid from aqueous medium was also performed with the best performing membrane (MR4, having the highest amount of AMPS). Separation efficiency of 100% and 94% were obtained using 10 mg/L and 50 mg/L of HA, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45290.