首页 | 本学科首页   官方微博 | 高级检索  
     

普通城门洞断面正常水深的近似计算式
引用本文:张宽地,吕宏兴,赵延风. 普通城门洞断面正常水深的近似计算式[J]. 长江科学院院报, 2010, 27(2): 34-36. DOI: 10.3969/j.issn.1001-5485.2010.02.008
作者姓名:张宽地  吕宏兴  赵延风
作者单位:西北农林科技大学,水利与建筑工程学院,陕西,杨凌,712100;中科院,水利部水土保持研究所,黄土高原土壤侵蚀与旱地农业国家重点实验室,陕西,杨凌,712100;西北农林科技大学,水利与建筑工程学院,陕西,杨凌,712100
基金项目:国家973计划课题(2007CB407201);;国家自然科学基金重点项目(40335050)
摘    要: 普通城门洞形过水断面是泄洪隧洞较常采用的断面形式之一,其几何图形由槽形与圆弧曲线构成,过水断面水力要素为分段函数,正常水深的计算无论是查图表法还是迭代试算法都比较繁琐,计算误差较大,且依赖图表, 不便于应用。为此,通过城门洞形断面均匀流方程的数学变换,并对引入的无量纲参数与相对临界水深的关系进行分析及计算,应用逐步优化拟合原理进行分段拟和,得到了城门洞形断面均匀流水深的直接计算式。实例计算及误差分析表明:在工程实用范围内(正常水深与拱顶半径之比在1.00到1.80之间),该公式最大相对误差仅为0.40%,且该式物理概念清晰明确、公式形式简捷,能为工程设计及水工设计手册的编制提供有益的参考。

关 键 词:水力计算  正常水深  城门洞形断面

Approximate Method Calculating Normal Depth of Arched-gate Section Tunnel
ZHANG Kuan-di,LV Hong-xing,ZHAO Yan-feng. Approximate Method Calculating Normal Depth of Arched-gate Section Tunnel[J]. Journal of Yangtze River Scientific Research Institute, 2010, 27(2): 34-36. DOI: 10.3969/j.issn.1001-5485.2010.02.008
Authors:ZHANG Kuan-di  LV Hong-xing  ZHAO Yan-feng
Affiliation:1.College of Water Resources and Architectural Engineering;Northwest A & F University;Yangling712100;China;2.Institute of Soil and Water Conservation;CAS.;Yangling 712100;China
Abstract:It is difficult to calculate normal water depth of a arched section tunnel for its complex geometrical shape.From using the mathematics transformation method and the theory of optimization and regression to deal with the basis equation of the normal depth in arched section tunnel,a new direct formula is derived in this paper,which overcomes the shortage of other methods,such as chart looking up method,trial and error method and iterative trial method.This method is simpler and more accurate than other appro...
Keywords:hydraulic calculation  normal depth  arched section tunnel  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《长江科学院院报》浏览原始摘要信息
点击此处可从《长江科学院院报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号