| 压铸模CAD/CAE/CAM的现状与发展对策 |
| |
| 引用本文： | 陈光明.压铸模CAD/CAE/CAM的现状与发展对策[J].模具技术,2003(5):45-49,55. |
| |
| 作者姓名： | 陈光明 |
| |
| 作者单位： | 南京农业大学,工学院,江苏,南京,210031 |
| |
| 摘 要： | 分析了我国压铸模设计与制造的现状、存在的问题，介绍了国内外压铸模CAD／CAE／CAM技术的研究进展，根据我国压铸模CAD／CAE／CAM技术研究与开发存在的问题提出了加快发展我国压铸模CAD／CAE／CAM技术对策。
|
| 关 键 词： | 压铸模 CAD CAE CAM 压力铸造 |
| 文章编号： | 1001-4934(2003)05-0045-05 |
Situation of Research And Development of Casting Die CAD/CAE/CAM Technology |
| |
| CHEN Guang-ming.Situation of Research And Development of Casting Die CAD/CAE/CAM Technology[J].Die and Mould Technology,2003(5):45-49,55. |
| |
| Authors: | CHEN Guang-ming |
| |
| Affiliation: | CHEN Guang-ming |
| |
| Abstract: | The situations of design and manufacturing of casting die in our country as well as the existing problems were analyzed. The progress of casting die CAD/CAE/CAM in domestic and abroad are also introduced. According to above mentioned, some suggestion was put forward to improve casting die technologies. |
| |
| Keywords: | casting die CAD C AE C A M |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
