丙烯氨氧化循环流化床反应器数学模型 |
| |
引用本文: | 魏飞,胡永琪,赖志平,金涌,俞芷青.丙烯氨氧化循环流化床反应器数学模型[J].石油化工,1998(4). |
| |
作者姓名: | 魏飞 胡永琪 赖志平 金涌 俞芷青 |
| |
作者单位: | 清华大学化学工程系 |
| |
基金项目: | 国家自然科学基金,清华大学基金 |
| |
摘 要: | 在修正现有丙烯氨氧化反应网络的基础上,采用一维扩散模型对丙烯氨氧化合成丙烯腈循环流化床提升管反应器进行了模拟计算,得到了反应产物轴向浓度分布和操作条件对丙烯腈收率的影响,考察了返混对丙烯腈收率的影响和循环流化床作为丙烯腈合成反应器的效果。
|
关 键 词: | 循环流化床 丙烯腈 反应器模型 返混 |
A CFB Reactor Model for the Synthesis of Acrylonitrile |
| |
Abstract: | circulating fluidized bed reactor model for synthesizing acrylonitrile is propossedA modified reaction kinetics network has been given with the kinetic parameters for two different catalysts(type A,type B) obtained by fitting the data acquired from commercial fluidized bedThe simulation results show that the axial gas dispersion has strong influence on the yield of acrylonitrileComparison between CFB reactor and turbulent fluidized bed reactor shows that the yield can increase by 10%~11% for type A catalyst and 8%~9% for type B catalystThis great increase in yield is largely due to the reduction of axial gas dispersion in CFBAs the reaction rate is relatively slow,the average solids density has strong influence on the conversion |
| |
Keywords: | circulating fluidized bed acrylonitrile reactor model back mixing |
本文献已被 CNKI 等数据库收录! |
|