| UOE焊管成形三维有限元模拟 |
| |
| 引用本文： | 任强,李大永,邹天下,彭颖红.UOE焊管成形三维有限元模拟[J].金属成形工艺,2011(6):80-84. |
| |
| 作者姓名： | 任强 李大永 邹天下 彭颖红 |
| |
| 作者单位： | [1]上海交通大学机械与动力工程学院,上海200240 [2]机械系统与振动国家重点实验室,上海200240 |
| |
| 基金项目： | 上海市教委科研创新项目（11CXYIO）;上海市科委项目（10QH1401400,09Jc1407000） |
| |
| 摘 要： | 建立了UOE焊管成形过程的三维有限元模型,模拟具有大变形和复杂接触的成形过程,分析板料各个成形段的回弹,获得了不同成形段板料的变形构形、等效塑性应变分布以及成形载荷的变化。研究结果可为UOE工艺设计以及评估成形机组制管能力提供指导。
|
| 关 键 词： | 焊管 UOE成形 有限元方法 |
The Simulation of UOE Pipe Forming by Three-dimensional Finite Element Method |
| |
| REN Qiang,LI Da-yong,ZOU Tian-xia,PENG Ying-hong.The Simulation of UOE Pipe Forming by Three-dimensional Finite Element Method[J].Metal Forming Technology,2011(6):80-84. |
| |
| Authors: | REN Qiang LI Da-yong ZOU Tian-xia PENG Ying-hong |
| |
| Affiliation: | 1. School of Mechanical Engineering,Shanghai Jiaotong University, Shanghai 200240, China 2. State Key Laboratory of Mechanical System and Vibration, Shanghai 200240, China) |
| |
| Abstract: | In this study, the three-dimensional finite element model of the UOE forming process has been established. The large deformation and complex contact during UOE forming process are simulated, and the spring back after forming is also calculated. The deformed geometries of different steps as long as distribution of the equivalent plastic strain and the force are obtained. The research is helpful in UOE forming process design and evaluating the capability of the pipe mill. |
| |
| Keywords: | weld pipe UOE forming finite element method |
| 本文献已被 维普 等数据库收录！ |
|
