| 某产品用黄铜壳体压底工艺改进实践 |
| |
| 引用本文： | 姜春茂,潘玲,张常玲,王连义,赵广军,周世伟.某产品用黄铜壳体压底工艺改进实践[J].金属成形工艺,2011(5):59-62. |
| |
| 作者姓名： | 姜春茂 潘玲 张常玲 王连义 赵广军 周世伟 |
| |
| 作者单位： | 黑龙江华安机械有限责任公司,黑龙江齐齐哈尔161046 |
| |
| 摘 要： | 为解决生产窄口，提高生产效率，减少能源消耗，降低生产成本，将某产品用黄铜壳体压底工序进行工艺改进，通过优化模具设计，合理分配各部分金属变形，保证金属流线的连续性，更换加工设备，实现了该黄铜壳体压底工序由4次改为2次。
|
| 关 键 词： | 压底 工艺改进 金属流线 黄铜壳体 |
Pressing Bottom Improvement of the Brass Shell of a Product |
| |
| JIANG Chun-mao,PAN Ling,ZHANG Chang-ling,WANG Lian-yi,ZHAO Guang-jun,ZHOU Shi-wei.Pressing Bottom Improvement of the Brass Shell of a Product[J].Metal Forming Technology,2011(5):59-62. |
| |
| Authors: | JIANG Chun-mao PAN Ling ZHANG Chang-ling WANG Lian-yi ZHAO Guang-jun ZHOU Shi-wei |
| |
| Affiliation: | (Heilongjiang Huaan Machine Corporation Ltd. , Qiqihar 161046, China) |
| |
| Abstract: | To solve the key problem in production, improve the production efficiency, reduce energy consumption, lower production cost, the pressing bottom process was improved for the brass shell of a product. Through optimizing mold design, reasonable distribution of the metal, pattern of deformation to ensure continuous metal flow, replacing the processing equipment, the times of pressing bottom process for the brass shell was changed from four to two. |
| |
| Keywords: | pressing bottom process improvement metal flow line brass shell |
| 本文献已被 维普 等数据库收录！ |
|
