首页 | 本学科首页   官方微博 | 高级检索  
     

LY12硬铝合金TIG与A—TIG焊接接头组织和熔深的研究
引用本文:王燕,魏晓红,胡宗智.LY12硬铝合金TIG与A—TIG焊接接头组织和熔深的研究[J].新技术新工艺,2011(8):131-134.
作者姓名:王燕  魏晓红  胡宗智
作者单位:三峡大学机械与材料学院,湖北宜昌,443002
基金项目:宜昌市科学技术研究与开发项目资助(A08303-06)
摘    要:针对Al-Cu—Mg系共晶型高强度LY12硬铝合金,进行了TIG与A—TIG焊接接头组织特征和熔深变化规律的研究。结果表明,在相同焊接规范下,TIG与A—TIG焊接接头焊缝区金相组织均为树枝状晶,热影响区金相组织均为等轴晶,差别在于A—TIG焊接接头组织晶粒较粗大。高倍显微镜下的金相组织显示,A—TIG焊缝区和热影响区中强化相数量比TIG焊多,且比TIG焊粗大。另外由于活性剂的加入,电弧产生收缩,热量集中,使得A—TIG焊熔深比TIG焊大。

关 键 词:硬铝合金  TIG焊  A—TIG焊  金相组织  熔深

Research on Microstructure and Weld Penetration of LY12 Duralumin Alloy Welded Joint under TIG Welding and A-TIG Welding
WANG Yan,WEI Xiaohong,HU Zongzhi.Research on Microstructure and Weld Penetration of LY12 Duralumin Alloy Welded Joint under TIG Welding and A-TIG Welding[J].New Technology & New Process,2011(8):131-134.
Authors:WANG Yan  WEI Xiaohong  HU Zongzhi
Affiliation:WANG Yan,WEI Xiaohong,HU Zongzhi(College of Mechanical and Material Engineering,China Three Gorges University,Yichang 443002,China)
Abstract:This paper have researched the microstructure characteristics and weld penetration change law of welded joint of Al-Cu-Mg system eutectic type high strength LY12 duralumin alloy under TIG welding and A-TIG welding.Results showed that the weld zone microstructure of TIG welding and A-TIG welding was dendritic crystal and the heat-affected zone microstructure of TIG welding and A-TIG welding was equiaxed crystal under the same welding specification.The difference was that the microstructure of A-TIG welded jo...
Keywords:Duralumin alloy  TIG welding  A-TIG welding  Metallurgical structure  Weld penetration  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号