| 裱纸机输送部分运动分析与研究 |
| |
| 引用本文： | 解润,蔡吉飞,辛剑峰.裱纸机输送部分运动分析与研究[J].北京印刷学院学报,2013,21(4):24-26. |
| |
| 作者姓名： | 解润 蔡吉飞 辛剑峰 |
| |
| 作者单位： | 北京印刷学院机电工程学院,北京,102600;北京印刷学院机电工程学院,北京,102600;北京印刷学院机电工程学院,北京,102600 |
| |
| 基金项目： | 北京市教育委员会学术创新团队项目资助（PHR201107144） |
| |
| 摘 要： | 为了解决推纸器式裱纸机在工作过程中推纸器冲击造成的纸张堆积、定位精度不高等问题,对其输送过程进行了运动分析,得出推纸器输送面纸的要求,在动力学分析的基础上,提出两种推纸器速度的控制方案:脉冲速度控制和连续速度控制,运用多项式拟合的MATLAB程序求出二次曲线与三次曲线,并利用积分法验证了二次曲线的控制方案,在承受相同的冲击下,可使机器的速度得到提高。
|
| 关 键 词： | 裱纸机 推纸器输送 输送速度 速度曲线 |
Analysis and Research on the Transfer Part of Lamination Machine |
| |
| XIE Run,CAI Jifei,XIN Jianfeng.Analysis and Research on the Transfer Part of Lamination Machine[J].Journal of Beijing Institute of Graphic Communication,2013,21(4):24-26. |
| |
| Authors: | XIE Run CAI Jifei XIN Jianfeng |
| |
| Affiliation: | (College of Mechanical Engineering, Beijing Institute of Graphic Communication, Beijing 102600, China) |
| |
| Abstract: | In the process of the lamination machine＇s paper transferring ,push-gauge would cause impact to the face-paper, so the transfer is not smooth, positioning accuracy is not high. In order to solve the problems, motion analysis was carried out on the delivery process, obtained the conveying process requirement. Based on dynamics analysis, combined with the conveying process requirements, this paper put forward two kinds of push gauge speed control scheme, the pulse velocity control and continuous speed control scheme. Using the simulation with MATLAB and the quadratic curve and cubic curve, using integral method to verify the proposed control scheme of quadratic curve, and the proposed quadratic curve under the impact of the inherit, the speed of the machine was improved. |
| |
| Keywords: | lamination machine push-gauge transfer speed of transfer speed curve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
