| 基于PLC的胶印机离合压机构控制系统设计 |
| |
| 引用本文： | 杨春雷,陈虹.基于PLC的胶印机离合压机构控制系统设计[J].北京印刷学院学报,2013,21(4):27-30. |
| |
| 作者姓名： | 杨春雷 陈虹 |
| |
| 作者单位： | 北京印刷学院机电工程学院,北京,102600;北京印刷学院机电工程学院,北京,102600 |
| |
| 摘 要： | 为了精确稳定地控制胶印机的离合压机构,在分析顺序离合压工作条件和要求的基础上,设计了针对并联气缸驱动离合压机构的气动控制回路;依据系统控制要求,进行了以PLC为控制器的系统硬件选型和软件设计,实现了离合压的自动控制,并通过仿真软件对系统进行验证。结果表明,系统符合印刷工艺过程的要求。
|
| 关 键 词： | 离合压 气动系统 PLC 顺序控制 |
Design of Engagement and Disengagement Control System Based on PLC |
| |
| YANG Chunlei,CHEN Hong.Design of Engagement and Disengagement Control System Based on PLC[J].Journal of Beijing Institute of Graphic Communication,2013,21(4):27-30. |
| |
| Authors: | YANG Chunlei CHEN Hong |
| |
| Affiliation: | (Beijing Institute of Graphic Communication, Beijing 102600, China) |
| |
| Abstract: | In order to control engagement and disengagement device accurately, this paper proposed a on-off mechanism driving way by parallel pneumatic due to the on-offing principle, hardware and software of the system were designed based on PLC controller according to control requirements. The control system verified through simulation software met requirements of printing process. |
| |
| Keywords: | engagement and disengagement pneumatic system PLC sequential control |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
