|
|||||
|
|
| 基于非线性连续疲劳损伤的再制造毛坯剩余寿命评估 | |
| 引用本文： | 华亮,田威,廖文和,曾超.基于非线性连续疲劳损伤的再制造毛坯剩余寿命评估[J].机械工程学报,2015,51(21):132-136. |
| 作者姓名： | 华亮 田威 廖文和 曾超 |
| 作者单位： | 1．南京航空航天大学理学院南京211106； 2．南京铁道职业技术学院动力工程学院南京210031； 3．南京航空航天大学机电学院南京210016 |
| 基金项目： | 国家自然科学基金(51105205)和江苏省高级访问工程师(2014FG060)资助项目 |
| 摘 要： | 在考虑裂纹闭合效应对疲劳损伤影响的情况下，对Chaboche提出的非线性连续疲劳累积损伤模型进行了修正，得到了疲劳累积损伤及再制造毛坯剩余寿命评估模型，并由对称循环拉压疲劳试验数据得出了修正模型的相关参数。通过二级加载(高低加载和低高加载)拉压疲劳试验对再制造毛坯剩余寿命评估模型进行了验证，结果表明模型计算值和试验值吻合良好，证明修正后的模型能够准确预测再制造毛坯的剩余寿命。 |
| 收稿时间： | 2014-11-27 |
Remaining Life Evaluation for Remanufacturing Blanks Based on Non-linear Continuum Fatigue Damage Model |
|
| HUA Liang,TIAN Wei,LIAO Wenhe,ZENG Chao.Remaining Life Evaluation for Remanufacturing Blanks Based on Non-linear Continuum Fatigue Damage Model[J].Chinese Journal of Mechanical Engineering,2015,51(21):132-136. | |
| Authors: | HUA Liang TIAN Wei LIAO Wenhe ZENG Chao |
| Abstract: | Chaboche’s model of nonlinear continuum fatigue damage is modified based on the impact of crack closure effect on fatigue damage. A cumulative fatigue damage model is developed accordingly to predict the remaining life for condemned products to be remanufactured. The related parameters are concluded from fully reversed fatigue experiment. To verify the proposed model, tension-compression fatigue tests under two levels of load spectrum(high-low loading and low-high loading) are carried out. The results showed that the calculated value and experimental value are in good agreement. It has been proved to be an efficient method to predict the remaining life involved in remanufacturing technology. |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ | |
| 点击此处可从《机械工程学报》浏览原始摘要信息 | |
| 点击此处可从《机械工程学报》下载全文 | |