| 水溶液中电沉积Ni-Ce-P合金 |
| |
| 引用本文： | 沈.水溶液中电沉积Ni-Ce-P合金[J].电镀与精饰,2000,22(6):1-4. |
| |
| 作者姓名： | 沈 |
| |
| 作者单位： | 1. 湖北省药检高等专科学校,湖北,武汉,430064
2. 武汉大学,化学与环境科学学院,湖北,武汉,430072 |
| |
| 基金项目： | 国家自然科学基金资助课题! (5 96 710 5 6 ) |
| |
| 摘 要： | 报道了从含有混合配体：柠檬酸和氯化铵,稳定剂Ｈ３ＢＯ３的水溶液中电沉积出Ｎｉ－Ｃｅ－Ｐ合金镀层。讨论了镀液成分和电镀工艺条件（镀液的ｐＨ值、电流密度、温度、搅拌方式、阳极材料等）的选择。采用ＳＥＭ和ＸＰＳ对镀层的结构和组分进行分析,结果表明镀层是Ｎｉ－Ｃｅ－Ｐ合金。
|
| 关 键 词： | 镍铈磷合金 电沉积 水溶液 柠檬酸 氯化铵 |
Electrodeposition of Nickel-Cerium-Phosphorus Alloy from Aqueous Solutions |
| |
| SHEN Zheng,HUANG Qing-an,WU Jun.Electrodeposition of Nickel-Cerium-Phosphorus Alloy from Aqueous Solutions[J].Plating & Finishing,2000,22(6):1-4. |
| |
| Authors: | SHEN Zheng HUANG Qing-an WU Jun |
| |
| Abstract: | Nickel cerium phosphorus alloy deposits were obtained from aqueous solutions by using citric acid and ammonium chloride as mixed ligand and boric acid as stabilizer. The selectrons of bath components and plating parameters including electrolytic solution pH, cathodic current density, temperature of electrolytic solution, stiring method, anodic materials, etc. were discussed. Structure and components of the deposits were analyzed by means of SEM and XPS. And the results show that the deposits obtained are Ni Ce P alloys. |
| |
| Keywords: | nickel cerium phosphorus alloy electrodeposition aqueous solutionl |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
