首页 | 本学科首页   官方微博 | 高级检索  
     

垃圾填埋场防渗衬垫特性的离心模型试验与数值分析研究
引用本文:陈继东,施建勇,彭功勋.垃圾填埋场防渗衬垫特性的离心模型试验与数值分析研究[J].建筑科学,2011,27(1).
作者姓名:陈继东  施建勇  彭功勋
作者单位:河海大学岩土力学与堤坝工程教育部重点实验室,南京,210098
摘    要:垃圾填埋场中垃圾体和防渗土工膜的受力变形特性是普遍关心的问题,在现场试验尚无法获得满意的监测结果时,利用离心模型试验和有限元数值分析进行探讨性研究也是可以尝试的途径。通过离心模型试验研究和有限元计算,模拟了垃圾填埋场中填埋垃圾大变形条件下土工防渗膜的变形性状,在模型比率80的条件下,可以找到相应的模型材料来模拟实际工程中的土工膜;选用的防渗膜模拟材料和木屑土能较好地模拟垃圾填埋场中材料;邓肯-张模型和Goodman接触面模型能模拟垃圾土和土工膜以及界面的工作状态;土工膜中最大拉应力靠近坡肩,可达到极限抗拉强度的1/1.5倍;考虑到HDPE膜的抗拉安全,最大设计坡长应加以控制。

关 键 词:填埋场  离心模型试验  有限元  土工膜  

The Behavior of Liner in Landfill by Centrifuge Model Tests and FEM
CHEN Ji-dong,SHI Jian-yong,PENG Gong-xun.The Behavior of Liner in Landfill by Centrifuge Model Tests and FEM[J].Building Science,2011,27(1).
Authors:CHEN Ji-dong  SHI Jian-yong  PENG Gong-xun
Affiliation:CHEN Ji-dong,SHI Jian-yong,PENG Gong-xun(The Key Laboratory of Geomechanics and Embankment Engineering of the ministry of Education,Hehai University,Nanjing 210098,China)
Abstract:The deformation and stress behavior of geomembrane liner and solid waste in landfill are generally concerned.Field monitoring tests are not satisfied for selected data,centrifugal model test and numerical simulation will be good trial way.By the centrifugal model test and finite element method,large deformation characteristics of solid waste in landfill are simulated,and under the condition of model ratio 80 the geomembrane in landfill engineering can be modeled with corresponding material in test.Duncan-Zh...
Keywords:landfill  centrifugalmodel test  finite element method  geomembrane  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号