首页 | 本学科首页   官方微博 | 高级检索  
     

电火花线切割加工钕铁硼材料的研究
引用本文:陆志猛,祝锡晶,成全,赵亮.电火花线切割加工钕铁硼材料的研究[J].广东有色金属学报,2009(3).
作者姓名:陆志猛  祝锡晶  成全  赵亮
作者单位:中北大学机械工程与自动化学院;
基金项目:山西省自然科学基金资助项目(2007011071)
摘    要:对电火花线切割加工N35材料的影响因素进行了研究,结果表明:随着加工工件厚度的增加,切割速度逐步降低;在同一工作液下,切割速度越快,N35表面就越粗糙;乳化液为工作液时的加工速度比煤油基工作液的加工速度大,但表面质量较煤油基工作液的差.通过电火花线切割加工N35永磁材料、45钢、AZ91D及AS31材料以及车削、铣削加工N35永磁材料的对比试验发现,与传统车削及铣削加工法相比,用电火花线切割加工钕铁硼永磁材料具有明显地优势.

关 键 词:电火花线切割  钕铁硼  表面质量  

A study of Nd-Fe-B material machined by the electrospark wire-electrode cutting
LU Zhi-meng,ZHU Xi-jing,CHENG Quan,ZHAO Liang.A study of Nd-Fe-B material machined by the electrospark wire-electrode cutting[J].Journal of Guangdong Non-Ferrous Metals,2009(3).
Authors:LU Zhi-meng  ZHU Xi-jing  CHENG Quan  ZHAO Liang
Abstract:After researching the factor when wire electrical discharge machining(WEDM) processing the N35 permanent-magnet material,it indicated that along with the increase of the processing work's thickness,the cutting speed reduces gradually;with the identical working fluid,the cutting speed is quicker,the N35 surface is rougher;when the working fluid is emulsion,the cutting speed is quick than that of coal oil,but the surface quality is worse.With the contrast test of wire electrical discharge machining processing...
Keywords:wire electrical discharge machining(WEDM)  NdFeB  surface quality  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号