| 一种后退抽芯注塑模的设计 |
| |
| 引用本文： | 周宛,周航. 一种后退抽芯注塑模的设计[J]. 塑料科技, 2007, 35(10): 78-80 |
| |
| 作者姓名： | 周宛 周航 |
| |
| 作者单位： | 河南工业职业技术学院机械工程系,河南,南阳,473009;河南科技大学,河南,洛阳,471003 |
| |
| 摘 要： | 根据塑料扎条的特点,设计了相应结构的注塑模具,该模具采用后退抽芯脱模机构和特殊型腔镶拼方式,同时介绍了注塑模的工作过程。
|
| 关 键 词： | 注塑模 后退抽芯脱模 镶拼式型腔 |
| 文章编号： | 1005-3360（2007）10-0078-03 |
| 修稿时间： | 2007-07-09 |
Design of Injection Mould with Core-pulling backward System |
| |
| Zhou Wan,Zhou Hang. Design of Injection Mould with Core-pulling backward System[J]. Plastics Science and Technology, 2007, 35(10): 78-80 |
| |
| Authors: | Zhou Wan Zhou Hang |
| |
| Affiliation: | 1. Mechnical Engineering Department, Henan Polytechnic Institute, Nanyan 473009, China;2.Henan University of Science and Technology Luoyang 471003, China |
| |
| Abstract: | According to the structural characteristics of the plastic parcel-fastening bandage, the main structure of the injection mould was laid out. The key points of the design are the core-pulling backward system and insert blocks for core-cavity. Additionally the working process of the injection mould was introduced. |
| |
| Keywords: | Injection mould Core-pulling backward system Core-cavity formed by insert blocks |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
