Fabrication of MWNTs/nylon conductive composite nanofibers by electrospinning |
| |
Authors: | J.S. Jeong S.Y. Jeon T.Y. Lee J.H. Park J.H. Shin P.S. Alegaonkar A.S. Berdinsky J.B. Yoo |
| |
Affiliation: | aSchool of Advanced Materials Science and Engineering, Center for Nanotubes and Nanostructured Composites, SungKyunKwan University, Suwon, 440 736, Republic of Korea |
| |
Abstract: | MWNT/nylon 6, 6 composite nanofibers were fabricated using an electrospinning method, and the electrical properties were examined as a function of the filler concentration. Initially, the pristine, purified MWNTs were treated with a 3:1 mixture of concentrated H2SO4/HNO3 to introduce carboxyl groups onto the MWNT surface. The carboxylated MWNTs were then treated with thionyl chloride and an ethylenediamine solution for amide functionalization. FT-IR spectroscopy was used to examine the functionalization of the MWNTs. Nylon 6, 6 is readily soluble in formic acid. Therefore, the amide functionalized MWNTs were dispersed in formic acid. The solution remained stable and uniform for more than 40 h. –NH2 termination of the MWNTs improved the dispersion stability of the MWNTs in formic acid. The MWNTs-suspended in a solution of nylon 6, 6 in formic acid was electrospun to obtain the nanofibers. The electrical properties of the nanofibers were examined as a function of the filler concentration. The results showed that the I–V properties of the nanofiber sheet improved with increasing filler concentration. |
| |
Keywords: | MWNT Electrospinning Composite Nylon |
本文献已被 ScienceDirect 等数据库收录! |
|