| SiPESC.FEMS的单元计算模块设计模式 |
| |
| 引用本文： | 张盛,杨东生,尹进,李云鹏,陈飙松,张洪武.SiPESC.FEMS的单元计算模块设计模式[J].计算机辅助工程,2011,20(3):49-54. |
| |
| 作者姓名： | 张盛 杨东生 尹进 李云鹏 陈飙松 张洪武 |
| |
| 作者单位： | 大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系,大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系,大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系,大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系,大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系,大连理工大学 工业装备结构分析国家重点实验室 运载工程与力学学部 工程力学系 |
| |
| 基金项目： | 国家自然科学基金(90715037, 11072050, 10872041, 91015003, 51021140004)；国家基础性发展规划项目(2010CB832704)；国家高技术研究发展计划（“八六三”计划）(2009AA044501) |
| |
| 摘 要： | 基于开放式结构有限元软件系统SiPESC.FEMS,针对面向对象有限元研发过程中不同类型单元的计算特点和要求,采用工厂模式和构造器模式等软件设计模式,提出有限元单元计算的统一构建设计模式.该设计模式具备良好的可扩展性和可重用性.给出单元计算模块中各对象的统一接口及单元插件的定义方法.通过不同单元类型的计算实例展示该模块...
|
| 关 键 词： | 开放式结构有限元系统 SiPESC. FEMS 单元计算模块 插件 设计模式 |
| 收稿时间： | 4/2/2011 12:00:00 AM |
| 修稿时间： | 2011/4/15 0:00:00 |
Design pattern of element computation module of SiPESC.FEMS |
| |
| Zhang Sheng,Yang Dongshen,YIN Jin,LI Yunpeng,CHEN Biaosong and ZHANG Hongwu.Design pattern of element computation module of SiPESC.FEMS[J].Computer Aided Engineering,2011,20(3):49-54. |
| |
| Authors: | Zhang Sheng Yang Dongshen YIN Jin LI Yunpeng CHEN Biaosong and ZHANG Hongwu |
| |
| Affiliation: | State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology,State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology and State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology |
| |
| Abstract: | Based on the open finite element system SiPESC.FEMS, according to the computational characteristics and requirements of various kinds of elements in object-oriented finite element programming, a uniform building design pattern is proposed by using software design patterns such as factory pattern, builder pattern and so on. The design pattern has good scalability and reusability. The uniform interfaces of the objects and the definition methods of element plug-in are applied in the element computation module.... |
| |
| Keywords: | open finite element system SiPESC FEMS element computation module plug-in design pattern |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
|
