| Design and Machining of Combination Gear Cutter Hob |
| |
| 引用本文： | 龚振起,常伟,龚海涛. Design and Machining of Combination Gear Cutter Hob[J]. 哈尔滨工业大学学报(英文版), 1997, 0(4) |
| |
| 作者姓名： | 龚振起 常伟 龚海涛 |
| |
| 作者单位： | Dept. of Mechanical Engineering，Harbin Institute of Technology，Harbin，150001，China |
| |
| 摘 要： | ＤｅｓｉｇｎａｎｄＭａｃｈｉｎｉｎｇｏｆＣｏｍｂｉｎａｔｉｏｎＧｅａｒＣｕｔｅｒＨｏｂＧＯＮＧＺｈｅｎｑｉＣＨＡＮＧＷｅｉＧＯＮＧＨａｉｔａｏ（龚振起）（常伟）（龚海涛）（Ｄｅｐｔ．ｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＨａｒｂｉｎＩｎｓｔ...
|
Design and Machining of Combination Gear Cutter Hob |
| |
| GONG Zhenqi CHANG Wei GONG Haitao. Design and Machining of Combination Gear Cutter Hob[J]. Journal of Harbin Institute of Technology (New Series), 1997, 0(4) |
| |
| Authors: | GONG Zhenqi CHANG Wei GONG Haitao |
| |
| Abstract: | This paper takes the escapement plate of a mechanical pendulum clock as an example,analyses the design of combination form cutter hob for special profile gears, selection of parameters and calculation for tooth profile coordinates and discusses the grinding of cutter hob tooth profile on optical contour grinder. |
| |
| Keywords: | Special profile gear escapement plate combination form cutter hob roughing tooth finishing tooth optical contour grinder |
| 本文献已被 CNKI 等数据库收录！ |
