| 基于Moldflow的多型腔PET瓶坯注射模设计 |
| |
| 引用本文： | 胡青春,唐明真,李炎辉,姜晓平. 基于Moldflow的多型腔PET瓶坯注射模设计[J]. 模具工业, 2010, 36(4): 11-15 |
| |
| 作者姓名： | 胡青春 唐明真 李炎辉 姜晓平 |
| |
| 作者单位： | 1. 华南理工大学,机械与汽车工程学院,广东,广州,510640
2. 广东星联精密机械有限公司,广东,佛山,528251 |
| |
| 摘 要： | 使用Moldflow软件分析了1模12腔PET瓶坯热流道注射模注射成型过程,直观地模拟出塑料成型的充填、流动及冷却过程,得到了设定条件下的成型工艺参数,预测设计中潜在的缺陷,可为修改模具设计提供依据。
|
| 关 键 词： | CAE Moldflow 塑料模设计 多型腔模 PET瓶坯模 |
Moldflow-based design of multi-cavity injection mould for PET bottle-blank |
| |
| HU Qing-chun,TANG Ming-zhen,LI Yan-hui,JIANG Xiao-ping. Moldflow-based design of multi-cavity injection mould for PET bottle-blank[J]. Die & Mould Industry, 2010, 36(4): 11-15 |
| |
| Authors: | HU Qing-chun TANG Ming-zhen LI Yan-hui JIANG Xiao-ping |
| |
| Affiliation: | 1.School of Mechanical and Automotive Engineering/a>;South China University of Technology/a>;Guangzhou/a>;Guangdong 510640/a>;China/a>;2.Guangdong Xinglian Precise Machinery Co./a>;Ltd/a>;Foshan/a>;Guangdong 528251/a>;China |
| |
| Abstract: | The Moldflow software was used to analyze the injection molding process of a 12-cavity hot runner injection mould for PET bottle-blank.The mold filling,flowing and cooling processes were visually simulated and the parameters under the conditions of the molding process were obtained.Some potential design defects were predicted that will help to modify the mould design. |
| |
| Keywords: | CAE Moldflow design of mould for plastics multi-cavity mould mould for PET bottle-blank |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
