首页 | 本学科首页   官方微博 | 高级检索  
     

多级齿轮传动系统传动误差快速预测
引用本文:郭栋,石晓辉,施全,邓斌.多级齿轮传动系统传动误差快速预测[J].四川大学学报(工程科学版),2012,44(3):224-228.
作者姓名:郭栋  石晓辉  施全  邓斌
作者单位:1. 西南交通大学机械工程学院,四川成都610031 重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400054
2. 重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆,400054
3. 西南交通大学机械工程学院,四川成都,610031
基金项目:重庆高校优秀成果转化资助项目(Kjzh10211) 重庆市教委科学技术研究项目(KJ100823)
摘    要:针对设计阶段多级齿轮传动系统传动误差快速预测问题,利用切片法快速预测了单级传动误差,再依据多级传动误差计算公式,预测了多级传动的传动误差。并以一台两级升速箱为研究对象,利用编制的传动误差预测程序计算了升速箱整体传动误差,同时通过一套高精度的传动误差测量设备测量了该升速箱的传动误差,对比发现测量数据和预测数据趋势一致,预测数据规律性的大于测量数据。为多级齿轮传动产品设计阶段进行传动误差快速预测提供了一种参考方法。

关 键 词:渐开线  斜齿轮  传动误差  预测  切片法
收稿时间:2011/7/17 0:00:00
修稿时间:9/20/2011 3:52:20 PM

Research on Fast Prediction of Multistage Gear Transmission Error
Guo Dong,Shi Xiaohui,Shi Quan and Deng Bin.Research on Fast Prediction of Multistage Gear Transmission Error[J].Journal of Sichuan University (Engineering Science Edition),2012,44(3):224-228.
Authors:Guo Dong  Shi Xiaohui  Shi Quan and Deng Bin
Affiliation:1 (1.College of Mechanical Eng.,Southwest Jiaotong Univ.,Chengdu 610031,China,2.The Key LAB of Automobile Parts and Test Technique of Ministry of Education.Chongqing Univ.of Technol.,Chongqing 400054,China)
Abstract:In order to meet the demand of the fast prediction of ear transmission error in the product design stage,based on the causes of gear transmission error,the slicing method was used for calculating the transmission error of a two-stage gearbox.Then through two rotate encoders the transmission error of the gearbox was tested.The trend of the calculated data and the testing data was the same,but the calculated data was larger than the testing data.
Keywords:involute  helical gear  transmission error(TE)  prediction  slicing method
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《四川大学学报(工程科学版)》浏览原始摘要信息
点击此处可从《四川大学学报(工程科学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号