| 不等齿顶宽间隔绕组对直接驱动转台电机转矩特性的影响 |
| |
| 引用本文： | 董婷,黄伟,王成元.不等齿顶宽间隔绕组对直接驱动转台电机转矩特性的影响[J].电工技术学报,2010(8). |
| |
| 作者姓名： | 董婷 黄伟 王成元 |
| |
| 作者单位： | 沈阳工业大学电气工程学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50375102) |
| |
| 摘 要： | 为了满足直接驱动数控转台对低速大转矩电机的要求,研究并设计了一种基于极槽数相近结构的不等齿顶宽间隔绕组多极永磁同步电机。多极电机保证了转台具有较低的额定转速。极槽数相近结构不仅可以提高绕组短距系数,更能有效地降低电机的齿槽转矩波动。间隔绕组和不等齿顶宽结构的配合设计最大化了定子齿磁链和绕组系数,从而有效地提高了电机的转矩密度。另外,还采用解析计算方法分析了不等齿顶宽结构对齿槽转矩波动和谐波绕组系数的影响。从有限元软件ANSYS计算结果和实验结果可以看出,样机的齿槽转矩波动小于额定转矩的1%;与等齿宽电机相比,不等齿顶宽结构有效地提高了电机的平均转矩,证明了所提出设计方法的正确性和有效性。
|
| 关 键 词： | 直接驱动 低速 极槽数相近 间隔绕组 不等齿顶宽 永磁同步电机 |
Influence of Unequal Teeth Tips Width and Alternate Winding on Torque Characteristics in Direct Drive Table Motor |
| |
| Dong Ting Huang Wei Wang Chengyuan.Influence of Unequal Teeth Tips Width and Alternate Winding on Torque Characteristics in Direct Drive Table Motor[J].Transactions of China Electrotechnical Society,2010(8). |
| |
| Authors: | Dong Ting Huang Wei Wang Chengyuan |
| |
| Affiliation: | Dong Ting Huang Wei Wang Chengyuan (Shenyang University of Technology Shenyang 110870 China) |
| |
| Abstract: | To satisfy the requirement of the low speed high torque permanent magnet synchronous motor(PMSM) used in the numerical control(NC) table,the similar pole and slot number multipolar PMSM with unequal teeth tips width and alternate winding is researched and designed in this paper. This kind of motors can operate with lower speed. The structure of similar pole and slot number can increase the winding pitch coefficient,and reduce its inherent cogging torque ripple effectively. And the unequal teeth tips width a... |
| |
| Keywords: | Direct drive low speed similar slot and pole number alternate winding unequal teeth tips width PMSM |
| 本文献已被 CNKI 等数据库收录！ |
