首页 | 本学科首页   官方微博 | 高级检索  
     

SiO2空心微球的制备与表征
引用本文:王吉会,董青. SiO2空心微球的制备与表征[J]. 材料开发与应用, 2009, 24(4): 42-47
作者姓名:王吉会  董青
作者单位:天津大学材料科学与工程学院,天津,300072
基金项目:天津市应用基础研究计划面上基金项目 
摘    要:以自制的微米级碳酸钙颗粒为模板,正硅酸乙酯为硅源,通过溶胶-凝胶方法合成出CaCO3/SiO2核壳结构;随后通过高温煅烧、酸浸和干燥处理,制备出圆形度高、分散性好、结构完整的微米级SiO2空心球。并利用SEM、XRD、FTIR、TG和压缩实验等方法对空心微球的形貌、结构和抗压强度进行了分析和测定。SiO2空心微球的粒径为2-5μm,壳层厚度为0.42-0.85μm,比表面积为554.01m^2/g,最可几孔径为1.7nm,抗压强度在20~30MPa之间。

关 键 词:SiO2空心微球  碳酸钙模板  合成  表征  抗压强度

Synthesis and Characterization of Hollow Silica Microspheres
WANG Ji-hui,DONG Qing. Synthesis and Characterization of Hollow Silica Microspheres[J]. Development and Application of Materials, 2009, 24(4): 42-47
Authors:WANG Ji-hui  DONG Qing
Affiliation:WANG Ji-hui,DONG Qing (School of Materials Science , Engineering,Tianjin University,Tianjin 300072,China)
Abstract:CaCO3/SiO2 core-shell structure was prepared by sol-gel route and using calcium carbonate microparticles as core templates and TEOS as silica source,and then the hollow silica microspheres were synthesized after calcination,dissolution and washing process.The surface morphology,structure and compressive strength of hollow silica microspheres were examined and determined by using SEM,XRD,FTIR,TG and compression tester.The results show that the as-synthesized hollow silica microspheres are uniform spherical p...
Keywords:Hollow silica microsphere  CaCO3 template  Synthesis  Characterization  Compressive strength  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号