| 用大型盘铣刀加工复杂三维曲面的方法 |
| |
| 引用本文： | 钱志华,杨金华. 用大型盘铣刀加工复杂三维曲面的方法[J]. 大电机技术, 2002, 0(4): 41-43 |
| |
| 作者姓名： | 钱志华 杨金华 |
| |
| 作者单位： | 哈尔滨电机厂有限责任公司,黑龙江,哈尔滨,150040 |
| |
| 摘 要： | 本文介绍了如何用大型盘铣刀三轴联动滚切数控加工方式加工复杂三维曲面的方法，对由于刀具及铣头干扰，无法用五轴联动端铣加工完成的复杂三维曲面加工问题进行了深入研究探讨，并结俣万家寨大叶泵叶片压模的实际加工，介绍了这种新曲面数控加工的方法。
|
| 关 键 词： | 大型盘铣刀 加工 复杂三维曲面 数控加工 数控机床 |
| 文章编号： | 1000-3983(2002)04-0041-03 |
| 修稿时间： | 2001-12-12 |
The Method of complex 3D Surface NC Machining with Large Slot Milling Cutter |
| |
| QIAN Zhi-hua,YANG Jin-hua. The Method of complex 3D Surface NC Machining with Large Slot Milling Cutter[J]. Large Electric Machine and Hydraulic Turbine, 2002, 0(4): 41-43 |
| |
| Authors: | QIAN Zhi-hua YANG Jin-hua |
| |
| Abstract: | In this paper,a new method of complex 3D surface NC machining is studied and explored deeply.The three-axis simultaneous side milling method with large slot milling cutter is used in this way.It can solve some difficult problems of some NC machinging complex 3D surfaces which can not be machined with five-axis simultaneous end milling method because of the interference of cutter and machine milling head.And the practical machining of Wanjiazhai pump blades mold by this way is also introduced. |
| |
| Keywords: | complex 3D surface NC machining large slot milling cutter interference efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
