Mechanical properties of particulate‐filler/woven‐glass‐fabric‐filled vinyl ester composites

Studies of the effect of particulate fillers on specific mechanical properties of vinyl ester epoxy (VE) reinforced with woven glass fiber composites were carried out with different filler types and particulate filler contents (1%, 3%, and 5% by weight). Two types of particulate filler were used, i.e., calcium carbonate (CC) and phenolic hollow microspheres (PHMS). The composites were prepared by using a hand lay‐up and vacuum bagging method. Woven glass fabric composites filled with particulate PHMS were observed to have better specific flexural strength and specific impact strength, as well as lower density, than those filled with particulate CC. Morphological features determined by scanning electron microscope (SEM) proved that the PHMS filler experienced good bonding in the VE matrix, a feature which contributed to the improvement in the properties of the composites. The incorporation of particulate fillers into the composites also influenced the storage modulus with a minimal effect on T_g. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers