| 加氢裂化尾油产品密度换算表选择 |
| |
| 引用本文： | 杜艳泽,李鹏,黄新露,关明华. 加氢裂化尾油产品密度换算表选择[J]. 炼油技术与工程, 2013, 0(11): 52-55 |
| |
| 作者姓名： | 杜艳泽 李鹏 黄新露 关明华 |
| |
| 作者单位： | [1]中国石油化工股份有限公司抚顺石油化工研究院,辽宁省抚顺市113001 [2]中国石油化工股份有限公司天津分公司,天津市300270 |
| |
| 摘 要： | 通过对5种典型中试装置和2种工业装置加氢裂化尾油进行密度测定与换算,采用趋势图和最大差值等方法对实验数据进行处理分析,考察了3种密度换算表对加氢裂化尾油的适用性、稳定性与准确性。确认GB/T 1885—1998《石油计量表》D表更适合作为加氢裂化尾油密度换算表,并建议尾油密度测量温度应低于80℃,同时指出了该表存在测量范围不足的问题,为炼化企业选用合适的尾油密度换算工具表提供了参考依据。
|
| 关 键 词： | 加氢裂化 尾油 密度换算表 BMCI 值 |
Study on selection of for tail oil from density conversion tables hydrocracking unit |
| |
| Du Yanze,Li Peng,Huang Xinlu,Guan Minghua. Study on selection of for tail oil from density conversion tables hydrocracking unit[J]. Petroleum Refinery Engineering, 2013, 0(11): 52-55 |
| |
| Authors: | Du Yanze Li Peng Huang Xinlu Guan Minghua |
| |
| Affiliation: | 1. Fushun Research Institute of Petroleum and Petrochemicals, SINOPEC, Fushun , Liaoning 113001 ; 2. SINOPEC Tianjin Petrochemical Company, Tianjin 300270) |
| |
| Abstract: | The applicability, stability and correctness of 3 types of density conversion tables for hydro- cracking tail oils are studied by the measurements of densities of tail oils from 5 types of typical pilot plants and 2 types of commercial hydrodracking units and through the analysis of test data by trend diagram and maximum difference value. It is confirmed that ＂Petroleum Metering Table＂ D, GB/T 1885--1998 is more applicable as the density conversion table for hydrocracking oil. It is recommended that the density of tail oil should be measured at a temperature lower than 80℃. Although the scope of measurements are not sufficient, the conversion tables provide a good basis for the appropriate conversion of densities of hydrocracking tail oil for petrochemical industry. |
| |
| Keywords: | hydrocracking tail oil density conversion table BMCI value |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
