| 缸筒存在半孔滚压中滚压工具的磨损分析及改善研究 |
| |
| 引用本文： | 张世良,杨晋平. 缸筒存在半孔滚压中滚压工具的磨损分析及改善研究[J]. 机械制造与自动化, 2011, 40(1): 63-66,69 |
| |
| 作者姓名： | 张世良 杨晋平 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,江苏南京,210016
2. 豫北(新乡)汽车动力转向器有限公司,河南新乡,453003 |
| |
| 摘 要： | 针对在缸筒存在半孔的滚压工艺的推广过程中,出现的滚压头滚子与支撑心轴急剧磨损情况,进行理论分析以及失效状况的汇总。通过改变滚压头的受力状况和使用环境等,提高滚压头使用寿命,为油缸内壁存在半孔的滚压工艺的推广及滚压头使用寿命提升总结了经验。
|
| 关 键 词： | 半孔 滚柱 芯轴 磨损 使用寿命 经验 |
Research on the Rolling Process Realization when Half Hole Exists |
| |
| ZHANG Shi-liang,YANG Jin-ping. Research on the Rolling Process Realization when Half Hole Exists[J]. Machine Building & Automation, 2011, 40(1): 63-66,69 |
| |
| Authors: | ZHANG Shi-liang YANG Jin-ping |
| |
| Affiliation: | ZHANG Shi-liang1,YANG Jin-ping2(1.College of Mechanical & Electrical Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China,2.Yubei Power Steering System Co.,Ltd.,Xinxiang 453003,China) |
| |
| Abstract: | Aiming at the sharp abrasion between milled head of cylindrical roller and support central spindle which occurs during the promotion of cylinder rolling process with half hole on barrel,this article carries out the theoretical analysis and compiles the failure conditions.The service life of milled head can be enhanced effectively through changing the force condition and using environment and so on.It also summarizes the experiences of internal face of barrel and the service life of milled head for the promo... |
| |
| Keywords: | half hole cylindrical roller central spindle abrasion service life experience |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
