首页 | 本学科首页   官方微博 | 高级检索  
     

高应变率对AM60镁合金力学性能的影响
引用本文:廖慧敏,龙思远,蔡军.高应变率对AM60镁合金力学性能的影响[J].机械工程材料,2009,33(1).
作者姓名:廖慧敏  龙思远  蔡军
作者单位:廖慧敏,龙思远,LIAO Hui-min,LONG Si-yuan(重庆大学机械工程学院,重庆,400030);蔡军,CAI Jun(长安汽车有限责任公司,重庆,400023)  
摘    要:分别采用静态拉伸试验机和冲击拉伸试验机测定了AM60压铸镁合金在不同应变率下(0.000 1,0.01,300和1 400 S-1)的拉伸力学性能,重点分析了高应变率对合金力学性能的影响,并用扫描电镜(SEM)对拉伸断口进行了分析.结果表明:在应变率很低和很高时,合金的屈服强度、抗拉强度随着应变率的增加变化不大;从静态和动态(高应变率)结果综合比较来看,应变率对强度和断后伸长率有一定的影响,而弹性模量则对应变率不敏感;另外,动态和静态的断裂方式基本相同,都是以准解理断裂为主,局部区域呈沿晶断裂,局部区域存在典型的缩松断裂形貌.

关 键 词:AM60镁合金  应变率  力学性能

Influence of High Strain Rate on Mechanical Properties of AM60 Magnesium Alloy
LIAO Hui-min,LONG Si-yuan,CAI Jun.Influence of High Strain Rate on Mechanical Properties of AM60 Magnesium Alloy[J].Materials For Mechanical Engineering,2009,33(1).
Authors:LIAO Hui-min  LONG Si-yuan  CAI Jun
Affiliation:1.Chongqing University;Chongqing 400030;China;2.Chang'an Automobile Liability Co.;Ltd;Chongqing 400023;China
Abstract:Tensile test of AM60 casting magnesium alloy at different strain rates(0.000 1,0.01,300 and 1 400 s-1) were carried out using static tensile testing machine and tensile impact testing machine,and then the stress-strain curves were obtained and the fractures were observed by SEM.The results showed that the yield strength and tensile strength varied slightly with the increass of strain rate at low strain rate or high strain rate.Comparing the results of static state and dynamic state tests,the strain rate inf...
Keywords:AM60 magnesium alloy  strain rate  mechanical property  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号