| T型管液压成形过程的有限元分析 |
| |
| 引用本文： | 苏岚, 王先进, 唐荻, 范光尧. T型管液压成形过程的有限元分析[J]. 工程科学学报, 2002, 24(5): 537-540. DOI: 10.13374/j.issn1001-053x.2002.05.014 |
| |
| 作者姓名： | 苏岚 王先进 唐荻 范光尧 |
| |
| 摘 要： | 应用动态显式有限元法,建立了T型管液压成形分析模型,对不同加载条件下的模拟结果进行对比,分析了轴向载荷的作用,探讨了最佳载荷曲线的确立原则.
|
| 关 键 词： | 汽车工业 T型管 管件液压成形 动态显式有限元 有限元分析 |
| 收稿时间： | 2001-07-31 |
Analysis of T-shaped Tube Hydroforming by Finite Element Method |
| |
| SU Lan, WANG Xianjin, TANG Di, FAN Guangyao. Analysis of T-shaped Tube Hydroforming by Finite Element Method[J]. Chinese Journal of Engineering, 2002, 24(5): 537-540. DOI: 10.13374/j.issn1001-053x.2002.05.014 |
| |
| Authors: | SU Lan WANG Xianjin TANG Di FAN Guangyao |
| |
| Abstract: | Workpiece forming in the T-shaped tube hydroforming process takes place through internal pressure and axial load. If these loads are chosen poorly there will be failure in the workpiece involving wrinkle or bursting. A dynamic FEM model is built for the T-shaped tube hydroforming process. Through analyzing the different simulation results, the influence of axial load is discussed and the optimum loading profile is determined. |
| |
| Keywords: | automotive industry T-shaped tube tube hydroforming dynamic explicit finite element method finite element analysis |
|
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
