首页 | 本学科首页   官方微博 | 高级检索  
     


The study of chip characteristics and tool wear in milling of SKD61 mold steel
Authors:Chen  Shao-Hsien  Gao   Min-Sheng
Affiliation:1.The Graduate Institute of Precision Manufacturing, National Chin-Yi University of Technology, Taichung City, Taiwan
;2.Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung City, Taiwan
;
Abstract:

In recent years, many machining applications have used dry cutting for high-speed cutting, for which, tool life prediction and research are important issues. In this study, a tungsten carbide tool cutting steel SKD61 was used, and the actual value of the chip shooting and the wear of the flank were determined using an industrial camera. The chip type and chip color are also discussed. After color calibration and chromaticity conversion, the model was trained through the neural network and the results were predicted. The tool wear curve and the theoretical curve were found to be closely related, and the chip color changed regularly. In the CIE XY chromaticity coordinate value, when the initial cutting was observed, the chip chromaticity coordinate point range was small, but as the wear amount increased, the chip chromaticity coordinate point range expanded gradually. The tool wear prediction established in this study was determined from the experimental results. The maximum errors of the test and verification were 0.031 mm and 0.022 mm. After calculation, the mean absolute percentage error (MAPE) was within 3 % and the accuracy level is MAPE is less than 10 %, so it has a high accurate prediction ability. Established tool wear predictions are also provided.

Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号