| 铝合金搅拌摩擦焊接头行为分析 |
| |
| 引用本文： | 栾国红,NorthTH,郭德伦,张田仓.铝合金搅拌摩擦焊接头行为分析[J].焊接学报,2002,23(6):62-66. |
| |
| 作者姓名： | 栾国红 NorthTH 郭德伦 张田仓 |
| |
| 作者单位： | 1. 中国搅拌摩擦焊中心,北京,100024
2. 多伦多大学,加拿大,M5S 3E4 |
| |
| 摘 要： | 详细介绍了搅拌摩擦焊（FSW）接头塑性流变数值模拟所得到的结果，并且利用搅拌摩擦焊的“插入试验”，测量了搅拌头旋转着插入铝合金材料过程中作用在搅拌头上的作用力，并将之转化为有效的粘度值和温度输出，确定了搅拌摩擦焊过程中充分塑化区（FPZ）的材料粘性，3－D数值模拟结果显示了搅拌头肩台下大约1.5mm的紊流区域的形成；解释了在异种金属搅拌摩擦焊接过程中无序混合产生的间混薄层结构，以及局部液相形成（初始熔化）引起的搅拌头的瞬间滑移导致了在特定的温度下（Tcrit）的材料粘性迟滞。
|
| 关 键 词： | 搅拌摩擦焊 焊接 铝合金 流变 |
| 文章编号： | 0253-360X(2002)06-62-05 |
| 收稿时间： | 2002/5/8 0:00:00 |
Characterizations of Friction Stir Welding on Aluminum Alloy |
| |
| LUAN Guo hong,North T H,GUO De lun and ZHANG Tian ang.Characterizations of Friction Stir Welding on Aluminum Alloy[J].Transactions of The China Welding Institution,2002,23(6):62-66. |
| |
| Authors: | LUAN Guo hong North T H GUO De lun and ZHANG Tian ang |
| |
| Affiliation: | China FSW Center, Beijing 100024, China,China FSW Center, Beijing 100024, China and China FSW Center, Beijing 100024, China |
| |
| Abstract: | The results produced during fluid flow modeling of friction stir welding are described.The viscosity of material in the fully plasticized region is determined using plunge testing,where the forces that acting on a rotating steel pin as it penetrates the aluminum alloy base material are measured and converted into effective viscosities and temperature output.3 D modeling results show the formation of a chaotic flow zone about 1.5 mm below the tool shoulder.It is suggested that chaotic mixing produces the intermingled lamellae formed in dissimilar FSW welds.Also,transient tool slipp age produced by local liquid formation results in hysteresis in the viscosity/shear stress plane at a critical temperature Tcrit. |
| |
| Keywords: | friction stir welding welding aluminum alloy flow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
