| 2050轧机粗轧过程温度仿真模型的研究 |
| |
| 引用本文： | 孙登月,杜凤山,杨喜荣,张建民,张晓峰,吴建峰. 2050轧机粗轧过程温度仿真模型的研究[J]. 钢铁研究学报, 2004, 16(2): 33-36 |
| |
| 作者姓名： | 孙登月 杜凤山 杨喜荣 张建民 张晓峰 吴建峰 |
| |
| 作者单位： | 1. 燕山大学机械工程学院,河北,秦皇岛,066004
2. 宝山钢铁集团公司技术中心,上海,201900 |
| |
| 基金项目： | 国家自然科学基金资助项目(5007507) |
| |
| 摘 要： | 采用差分原理建立了宝山钢铁集团公司2050轧机粗轧段钢板温度的数学模型(包括空冷、除鳞水冷却、轧制升温、轧辊接触共4种影响温度的过程)．全面分析了2050热轧阶段钢板温度的变化过程，并编写了计算软件。计算结果与实测值吻合较好。
|
| 关 键 词： | 热轧 温度模型 差分法 |
| 文章编号： | 1001-0963(2004)02-0033-04 |
| 修稿时间： | 2002-11-18 |
Temperature Model of Rough Rolling Process for Mill 2050 |
| |
| SUN Deng-yue,DU Feng-shan,YANG Xi-rong,ZHANG Jian-min,ZHANG Xiao-feng,WU Jian-feng. Temperature Model of Rough Rolling Process for Mill 2050[J]. Journal of Iron and Steel Research, 2004, 16(2): 33-36 |
| |
| Authors: | SUN Deng-yue DU Feng-shan YANG Xi-rong ZHANG Jian-min ZHANG Xiao-feng WU Jian-feng |
| |
| Affiliation: | SUN Deng-yue~1,DU Feng-shan~1,YANG Xi-rong~1,ZHANG Jian-min~2,ZHANG Xiao-feng~2,WU Jian-feng~2 |
| |
| Abstract: | The temperature model of 2050 rough rolling process for Bao Steel Co has been built by using differential method, in which air cooling heat transfer with high pressure water, deforming hot, and roller contact cooling were considered. The temperature variation of 2050 rough rolling was thoroughly analyzed. A soft ware of temperature simulation system was compiled. The result of calculation is consistent with test results. |
| |
| Keywords: | hot rolling temperature model differential method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
