| 基于ABAQUS的高磷铸铁激光淬火温度场分析 |
| |
| 引用本文： | 张胜文,夏子凡. 基于ABAQUS的高磷铸铁激光淬火温度场分析[J]. 计算机与数字工程, 2021, 49(1): 41-45. DOI: 10.3969/j.issn.1672-9722.2021.01.009 |
| |
| 作者姓名： | 张胜文 夏子凡 |
| |
| 作者单位： | 江苏科技大学机械工程学院 镇江 212003;江苏科技大学江苏省船海机械装备先进制造重点实验室 镇江 212003;江苏科技大学机械工程学院 镇江 212003 |
| |
| 摘 要： | 论文利用Abaqus有限元分析软件模拟仿真高磷铸铁激光淬火过程.模拟激光淬火温度场主要包括三维模型的建立、高磷铸铁热物性参数的计算、模型网格的划分、载荷的施加方法、移动热源的程序设计、淬硬层深度确定等.激光淬火试验选取激光扫描功率P=1100W和扫描速度v=25mm/s验证模拟仿真结果,结果显示仿真淬硬层层深与激光淬火...
|
| 关 键 词： | 高磷铸铁 激光淬火 光源模型 硬化层层深 |
Analysis of Laser Quenching Temperature Field of Phosphorus Cast Iron Based on ABAQUS |
| |
| ZHANG Shengwen,XIA Zifan. Analysis of Laser Quenching Temperature Field of Phosphorus Cast Iron Based on ABAQUS[J]. Computer and Digital Engineering, 2021, 49(1): 41-45. DOI: 10.3969/j.issn.1672-9722.2021.01.009 |
| |
| Authors: | ZHANG Shengwen XIA Zifan |
| |
| Affiliation: | (School of Mechanical Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003;Jiangsu Provincial Key Laboratory of Advanced Manufacturing for Marine Mechanical Equipment,Jiangsu University of Science and Technology,Zhenjiang 212003) |
| |
| Abstract: | In this paper,Abaqus finite element analysis software is used to simulate the laser quenching process of High-phos?phorus cast iron.The simulated laser quenching temperature field mainly includes the establishment of three-dimensional model,calculation of thermal properties of high-phosphorus cast iron,division of model mesh,application of load,programming of moving heat source,and determination of depth of hardened layer.The laser quenching test selects the laser scanning power P=1100W and the scanning speed v=25mm/s to verify the simulation results.The results show that the simulated hardened layer depth is basically consistent with the laser quenching test results. |
| |
| Keywords: | high-phosphorus cast iron laser quenching source model hardened layer depth |
| 本文献已被 维普 万方数据 等数据库收录！ |
