| 无油润滑涡旋压缩机齿端面密封的研究 |
| |
| 引用本文： | 李海生,刘振全,彭斌,陈英华,王作洪. 无油润滑涡旋压缩机齿端面密封的研究[J]. 润滑与密封, 2006, 0(1): 108-110 |
| |
| 作者姓名： | 李海生 刘振全 彭斌 陈英华 王作洪 |
| |
| 作者单位： | 兰州理工大学石油化工学院,兰州,730050;兰州理工大学机电工程学院,兰州,730050 |
| |
| 摘 要： | 涡旋压缩机在工作过程中动、静涡盘之间间隙存在泄漏损失,它是影响无油润滑涡旋压缩机工作性能的重要因素。在涡旋齿端面加由自润滑材料制成的密封条是实现无油润滑的一项关键技术。本文从材料和结构两方面阐述了密封条的基本特点,介绍了密封条的两种结构模型,说明了各自的工作原理,并对两种模型进行了受力分析,得出了密封条正常工作应满足的条件及选用两种结构模型应注意的问题。结果表明:密封条不但可以阻止通过轴向间隙的泄漏,而且降低了涡旋齿与涡盘底部摩擦功率损失。
|
| 关 键 词： | 无油润滑涡旋压缩机 密封条 结构模型 工作原理 受力分析 |
| 文章编号： | 0254-0150(2006)1-108-3 |
| 收稿时间： | 2005-01-13 |
| 修稿时间： | 2005-01-13 |
Research on the Tooth Sealing of Oil-free Scroll Compressor |
| |
| Li Haisheng,Liu Zhenquan,Peng Bin,Chen Yinghua,Wang Zuohong. Research on the Tooth Sealing of Oil-free Scroll Compressor[J]. Lubrication Engineering, 2006, 0(1): 108-110 |
| |
| Authors: | Li Haisheng Liu Zhenquan Peng Bin Chen Yinghua Wang Zuohong |
| |
| Affiliation: | 1. College of Petrochemical Teeh, Lanzhou Univ. of Tech. , Lanzhou 730050, China; 2. College of Mechano-Eleetronie Engineering, Lanzhou Univ. of Teeh. , Lanzhou 730050, China |
| |
| Abstract: | There is some leak losing between two scroll teeth when scroll compressor is working.The leakage problem is an important factor to influence the work performance of oil-free scroll compressor.The installation of self-lubricative seal element of scroll tooth is a key technique for oil-free scroll compressor.The characteristics of seal element were expatiated from material and structure,two kinds of structure models were introduced,and the work principle and excogitate force analysis of two kinds of models was explained.The result shows the seal element can hold back the leakage through axial clearance and reduce friction power loss between scroll tooth and bottom of scrolls. |
| |
| Keywords: | oil-free scroll compressor seal element structure model work principle force analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
