| 锁芯压铸模设计与制造 |
| |
| 引用本文： | 李成远.锁芯压铸模设计与制造[J].模具工业,2002(10):43-45. |
| |
| 作者姓名： | 李成远 |
| |
| 作者单位： | 山东潍坊华光精工设备有限公司,山东潍坊,261031 |
| |
| 摘 要： | 分析了车门锁芯零件的工艺性 ,设计了1副二次抽芯装置 ,可防止铸件在抽芯过程中损坏 ,并介绍了该模具的结构和制造工艺。
|
| 关 键 词： | 锁芯 压铸模 二次抽芯装置 滑片组 |
| 文章编号： | 1001-2168(2002)10-0043-03 |
| 修稿时间： | 2002年3月7日 |
Design and Manufacture of the Die- casting Die for the Lock Core |
| |
| LI Cheng-yuan.Design and Manufacture of the Die- casting Die for the Lock Core[J].Die & Mould Industry,2002(10):43-45. |
| |
| Authors: | LI Cheng-yuan |
| |
| Abstract: | The processing property of the lock core of the vehicle door was analyzed. A twice core-pulling device was designed, which could prevent the cast from damage during the core pulling. The structure and manufacturing technology the die were introduced. |
| |
| Keywords: | lock core die_casting die twice core_pulling device sliding blades |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
