W丝／Zr-Ti-Cu-Ni-Be-Co非晶基复合材料的制备与塑性变形

采用渗流铸造方法制备了W丝／Zr—Ti—Cu—Ni—Be—Co非晶基复合材料，研究了复合材料的变形方式及其机理。结果表明：W丝／Zr—Ti—Cu—Ni—Be—Co非晶基复合材料在准静态压缩条件下表现出很高的塑性和断裂能，与纯非晶相比提高超过十倍。随着W丝体积分数的增加，复合材料的变形方式由剪切滑移转变为W丝的弯曲和劈裂。W丝对非晶基体单一剪切带滑移的阻碍，促进多重剪切带的产生和扩展是复合材料产生大量塑性变形的微观机理。

Synthesis and Plastic Deformation of Tungsten Fiber Reinforced Bulk Metallic Glass Matrix Composite W-fiber/Zr-Ti-Cu-Ni-Be-Co

Tungsten fiber reinforced Zr-Ti-Cu-Ni-Be-Co bulk metallic glass matrix composite was fabricated by pressure infiltrating cast method. The deformation behaviors and mechanism were investigated. The results indicates that the strain of tungsten fiber reinforced bulk metallic glass matrix composite is more than 900% higher than those of pure Zr-Ti-Cu-Ni-Be-Co bulk metallic glass. The compressive failure mode of the composite shift from shear to localized fiber buckling and tilting with the increase of the volume fraction of tungsten fibers. The amount of plastic deformation of the composite is proportional to the numbers of shear bands. The increase in compressive toughness comes from the fibers restricting shear band propagation, promoting the generation of multiple shear bands.