| 确定梳棉机后固定盖板隔距的研讨 |
| |
| 引用本文： | 孙鹏子,邵敬党. 确定梳棉机后固定盖板隔距的研讨[J]. 棉纺织技术, 2003, 31(4): 15-17 |
| |
| 作者姓名： | 孙鹏子 邵敬党 |
| |
| 作者单位： | 丹东职业技术学院 |
| |
| 摘 要： | 后固定盖板隔距的确定要从后固定盖板作用出发。应从对纤维束定向度、纤维束预分梳、纤维损伤、生条棉结和杂质、梳棉机的产量、锡林的速度及喂入到锡林上棉束的大小及均匀程度等方面束考虑确定后固定盖板的隔距。提出了后固定盖板隔距应适当大一些掌握的观点，并通过试验论证了此观点。
|
| 关 键 词： | 梳棉机 后固定盖板 隔距 确定方法 |
| 文章编号： | 1001-7415(2003)04-0015-03 |
| 修稿时间： | 2002-11-20 |
Discussion on Back Stationary Flat Gauge in Carding Machine |
| |
| Sun Pengzi Shao Jingdang. Discussion on Back Stationary Flat Gauge in Carding Machine[J]. Cotton Textile Technology, 2003, 31(4): 15-17 |
| |
| Authors: | Sun Pengzi Shao Jingdang |
| |
| Affiliation: | Dangdong Vocation Technology Institute |
| |
| Abstract: | The gauge of back stationary flat is determined by its function, such as orientation to fibre bundle, precarding of fibre bundle, damage of fibre, neps & trash of card sliver, output of carding machine, speed of cylinder, size and evenness of fibre bundle in cylinder. The opinion about back stationary flat gauge is more bigger is put forward and proved by experiment. |
| |
| Keywords: | Carding Machine Back Stationary Flat Gauge Orientation Short Fibre |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
