Hygrothermal Properties of Adhesively Bonded Joints and Their Correlation with Bulk Adhesive Properties

The combined effects of heat (50ddot]C) and humidity (95% R.H.) on the lap shear and T-peel strengths of 120ddot]C, 150ddot]C and 215ddot]C service epoxy film adhesives have been characterized. Experimental results have indicated that effects of hygrothermal conditioning on lap shear and peel properties vary with exposure time and final testing temperatures and type of adhesive tested. In the cases where cohesive failure was observed in the shear and peel specimens, a correlation could be established between the bulk properties of the adhesives (tensile strength and elongation) and their adhesively bonded joint properties (shear and peel). When testing was carried out at room temperature, a general correlation between the tensile elongation and T-peel or shear could be obtained. At below freezing temperatures, lap shear strength seemed to be correlated with bulk tensile strength while peel correlated with bulk tensile elongation. At elevated temperatures, the relative contributions of bulk strength and elongation were the decisive factors as far as shear and peel strengths are concerned.