| 低碳低硅高铝钢熔炼过程成分变化研究 |
| |
| 引用本文： | 孙维,王海川,汪开忠,王建军,吴坚,赵斌.低碳低硅高铝钢熔炼过程成分变化研究[J].炼钢,2011,27(4). |
| |
| 作者姓名： | 孙维 王海川 汪开忠 王建军 吴坚 赵斌 |
| |
| 作者单位： | 1. 马鞍山钢铁股份有限公司技术中心,安徽马鞍山,243000
2. 安徽工业大学冶金与资源学院,安徽马鞍山,243002 |
| |
| 基金项目： | 国家“十一五”科技支撑计划(2007DAE30B01) |
| |
| 摘 要： | 根据马鞍山钢铁股份有限公司转炉生产实际，分别采用双渣法和单渣法冶炼5批38炉次低碳低硅高铝钢。通过分析该钢种冶炼过程中各元素的变化情况，钢水增碳、增硅和铝损、钙损等情况，得到低碳低硅高铝钢冶炼过程控制不同元素变化的关键工艺环节。
|
| 关 键 词： | 低碳低硅高铝钢 成分变化 关键工艺环节 |
Study on the composition change of low-carbon low-silicon high-aluminum steel in smelting process |
| |
| SUN Wei,WANG Hai-chuan,WANG Kai-zhong,WANG Jian-jun,WU Jian,ZHAO Bin.Study on the composition change of low-carbon low-silicon high-aluminum steel in smelting process[J].Steelmaking,2011,27(4). |
| |
| Authors: | SUN Wei WANG Hai-chuan WANG Kai-zhong WANG Jian-jun WU Jian ZHAO Bin |
| |
| Affiliation: | SUN Wei1,WANG Hai-chuan2,WANG Kai-zhong1,WANG Jian-jun2,WU Jian1,ZHAO Bin1(1.Technology Center,Ma'anshan Iron and Steel Co.,Ltd.,Ma'anshan 243000,China,2.Anhui University of Technology,School of Metallurgy and Resources,Ma'anshan 243002,China) |
| |
| Abstract: | According to the actual converter production in No.3 Steelmaking Plant of MaSteel,38 heats of low-carbon low-silicon high-aluminum(Low-C Low-Si High-Al) steel are smelted using double-slag process and single-slag process respectively.By analyzing the element changes in the process of steel smelting such as carbon pick up,silicon pick up,Al loss and Ca loss the key technology steps are obtained to control the change of different elements in the smelting process of Low-C Low-Si and High-Al steel. |
| |
| Keywords: | low-carbon low-silicon high-aluminum steel composition changes process key technology step |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
