| 催化裂化再生器应力腐蚀防护措施的研究 |
| |
| 引用本文： | 丁有发,陈盛军,李春诚. 催化裂化再生器应力腐蚀防护措施的研究[J]. 石油化工设备技术, 2001, 22(2): 1-3 |
| |
| 作者姓名： | 丁有发 陈盛军 李春诚 |
| |
| 作者单位： | 抚顺石油化工公司设备研究所，辽宁 抚顺 113008 |
| |
| 摘 要： | 抚顺石化分公司石油一厂催化裂化装置再生器、三旋等设备及烟气管道，由于应力腐蚀，致使器壁和管壁产生了大量裂纹。采取在器壁和管壁涂敷憎水型硅酸盐复合绝热涂料的方法，将壁温控制在150℃左右(高于酸露点温度130℃)，消除了产生应力腐蚀的环境，防止了应力腐蚀裂纹的扩展。
|
| 关 键 词： | 催化裂化；工艺设备；应力腐蚀；保温；防护措施 |
| 文章编号： | 1006-8805(2001)02-0001-03 |
| 修稿时间： | 2000-08-16 |
RESEARCH ON STRESS CORROSION PREVENTION FOR CATALYTIC CRACKING REGENERATOR |
| |
| Ding Youfa,etc.Fushun petrochemical companyequipment research institute,P.C. RESEARCH ON STRESS CORROSION PREVENTION FOR CATALYTIC CRACKING REGENERATOR[J]. Petro-Chemical Equipment Technology, 2001, 22(2): 1-3 |
| |
| Authors: | Ding Youfa etc.Fushun petrochemical companyequipment research institute P.C |
| |
| Affiliation: | Ding Youfa,etc.Fushun petrochemical companyequipment research institute,P.C 113008 |
| |
| Abstract: | The equipments of regenerator,third stage cyclone etc,and fluegas pipe of catalytic cracker in the first refinery of Fushun petrochemical company,occured a great quantity of crack on the shell wall and pipe wall caused by stress corrosion.By means of coating the water-detesting type silical compound heat-insulating material on shell wall and pipe wall,made the wall temperature controled about 150℃(higher than acid dew point temperature 130℃),removed the stress corrosion enviroment.The propagate of stress corrosion crack was prevented． |
| |
| Keywords: | Catalytiic cracking Process equipment Stress corrosion Insulation Prevention |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
