Fatigue strength of high strength dual-phase steel sheet

Fatigue tests have been carried out on lean-alloyed dual-phase steels with tensile strengths ranging from 300–800 MPa. Smooth specimens and specimens with punched holes were tested. The fatigue strength of dual-phase steel was found to be similar to that of other types of steel (eg solution hardened or microalloyed steels) of equal tensile strength. The fatigue strength increases with increasing yield strength. For notched specimens it is also related to the yield ratio. Work and bake hardening increase the fatigue strength of smooth specimens in proportion to the increase in yield strength. For notched specimens this effect is less and is dependent on the yield ratio. Bake hardening of material which was not work hardened also increased the fatigue strength. The notch sensitivity of low yield ratio dual-phase steel is found to be low. The notch sensitivity seems to increase with increasing yield ratio.