| 均匀设计在有色冶金试验研究中应用的探讨 |
| |
| 引用本文： | 孙培梅,陈爱良. 均匀设计在有色冶金试验研究中应用的探讨[J]. 稀有金属与硬质合金, 2002, 30(3): 22-25 |
| |
| 作者姓名： | 孙培梅 陈爱良 |
| |
| 作者单位： | 中南大学冶金科学与工程学院,湖南长沙,410083 |
| |
| 摘 要： | 对均匀设计在冶金实验研究中的应用进行了探讨，针对某实验中三个目标值和四个因素的具体情况，用均匀设计法进行了实验设计，建立了数学模型并进行了分析。结果表明：和正交设计L（6）^4相比，采用U6（6^4)均匀设计，可在较少的实验次数下得到最佳工艺条件，并能揭示出变量（Y）与各因素之间的定性关系。说明了均匀设计作为一种实验研究方法在冶金实验中具有重要的作用。
|
| 关 键 词： | 有色冶金 均匀设计 试验研究 正交设计 回归方程 |
| 文章编号： | 1004-0536(2002)03-0022-04 |
| 修稿时间： | 2002-03-06 |
A Reseach on the Application of Uniform Design in Metallurgical Tests |
| |
| SUN Pei-mei,CHEN Ai-liang. A Reseach on the Application of Uniform Design in Metallurgical Tests[J]. Rare Metals and Cemented Carbides, 2002, 30(3): 22-25 |
| |
| Authors: | SUN Pei-mei CHEN Ai-liang |
| |
| Abstract: | Research is made on the application of uniform design in metallurgical tests.Based on 3 target data and 4 factors in a test,uniform design is adopted for the test and mechanical models are established for the analysis.The results showed that compared with orthogonal-desgn L(6 4),the adoption of U 6(6 4)uniform design can ensure optimum process data with less tests and the qulitative relationship between the variants is shown,indicating that uniform design is of very importance in the metallargical experiments. |
| |
| Keywords: | uniform design test orthogonal design regression equation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
