| 连接片多工位级进模具设计 |
| |
| 引用本文： | 王鑫.连接片多工位级进模具设计[J].精密成形工程,2010,2(4):64-66. |
| |
| 作者姓名： | 王鑫 |
| |
| 作者单位： | 南京工程学院,材料工程学院,南京,211167 |
| |
| 摘 要： | 分析了连接片的冲压工艺性,设计了多工位级进冲压成形方案,详细阐述了单排排样设计方案,还介绍了连接片多工位级进模的总体结构及特点。实践证明:该模具结构合理,加工质量好,生产效率高,对此类零件的级进模设计有重要参考价值。
|
| 关 键 词： | 连接片 冲压 排样设计 模具设计 |
| 收稿时间： | 2010/2/24 0:00:00 |
| 修稿时间： | 2010/7/10 0:00:00 |
Design of Multi-position Progressive Die for Connecting Piece |
| |
| WANG Xin.Design of Multi-position Progressive Die for Connecting Piece[J].Journal of Netshape Forming Engineering,2010,2(4):64-66. |
| |
| Authors: | WANG Xin |
| |
| Affiliation: | School of Material Engineering, Nanjing Institute of Technology, Nanjing 211167, China |
| |
| Abstract: | The stamping technique of a connecting piece was analyzed, and a multi-position progressive stamping scheme was determined. The process of layout design arranged in single row was stated in detail and the total structure and characteristic of multi-position progressive die for connecting piece were introduced. By practice it is proved that the die structure is reasonable, the processing quality is good and the productivity is high, which has an important reference value for designing the progressive die of this kind of part. |
| |
| Keywords: | connecting piece stamping layout design die design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
