| 宏程序在数控铣床加工中的应用 |
| |
| 引用本文： | 杨钢,张继祥.宏程序在数控铣床加工中的应用[J].精密成形工程,2010,2(5):83-87. |
| |
| 作者姓名： | 杨钢 张继祥 |
| |
| 作者单位： | 重庆交通大学,机电与汽车工程学院,重庆,400074 |
| |
| 摘 要： | 应用用户宏程序及仿真加工技术,设计了一个能够实现矩形外形(矩形、圆角形和键槽形)和矩形型腔(圆角形、键槽形和空白槽形)的粗加工,精加工,粗、精连续加工程序。建立了对应的参数变量,并在数控仿真软件里模拟加工轨迹后再在机床上进行了实际加工进行验证。
|
| 关 键 词： | 宏程序 数控铣床 数控编程 |
| 收稿时间： | 2010/3/29 0:00:00 |
| 修稿时间： | 2010/9/10 0:00:00 |
The Application of Macro Program in NC Miller Process |
| |
| YANG Gang and ZHANG Ji-xiang.The Application of Macro Program in NC Miller Process[J].Journal of Netshape Forming Engineering,2010,2(5):83-87. |
| |
| Authors: | YANG Gang and ZHANG Ji-xiang |
| |
| Abstract: | The user macro program and simulation of machining technology were used to achieve a rectangular shape (rectangle, rounded shape and keyway) and the rectangular cavity (rounded shape, keyway and blank groove-shaped) roughing, finishing and coarse, fine continuous processing program. The corresponding parameter variables were established, and the working track was simulated by machining simulation software, then the actual working verification was carried out on NC machine. |
| |
| Keywords: | Macro program NC Milling machine NC programming |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
