| 石膏墙板螺杆挤压机溢流加料情况下输送量与螺杆转速的关系研究 |
| |
| 引用本文： | 朱桂华,李志鹏,薛洋,何将三. 石膏墙板螺杆挤压机溢流加料情况下输送量与螺杆转速的关系研究[J]. 机械传动, 2009, 33(6) |
| |
| 作者姓名： | 朱桂华 李志鹏 薛洋 何将三 |
| |
| 作者单位： | 中南大学,机电学院,湖南,长沙,410083;中南大学,机电学院,湖南,长沙,410083;中南大学,机电学院,湖南,长沙,410083;中南大学,机电学院,湖南,长沙,410083 |
| |
| 基金项目： | 长沙归一建材科技有限公司挤压墙板生产线项目 |
| |
| 摘 要： | 石膏墙板螺杆挤压机是石膏生产线的关键设备,为了获得足够的挤出量,必须采用溢流加料.由于石膏螺杆挤压机是多螺杆挤出,且要求出料横向纵向均匀,因此必须确立螺杆转速与挤出量的关系.特别是通过变频达到调整转速进而精确控制流量的目的.
|
| 关 键 词： | 螺杆挤压 有限元分析 溢流加料 ANSYS |
The Research of the Connection of Feeding Mete with Overfill Adding and Rotate Speed at Gesso Wallboard Screw Extrusion Machine |
| |
| Zhu Guihua,Li Zhipeng,Xue Yang,He Jiangsan. The Research of the Connection of Feeding Mete with Overfill Adding and Rotate Speed at Gesso Wallboard Screw Extrusion Machine[J]. Journal of Mechanical Transmission, 2009, 33(6) |
| |
| Authors: | Zhu Guihua Li Zhipeng Xue Yang He Jiangsan |
| |
| Abstract: | Gesso wallboard screw extrusion machine is the key parts of gesso product line, to achieve enough extrusion mete, overfill adding method is adopted. Because of adopting several screws extrusion, and requiring coming out mete uniformity at landscape orientation and portrait, the connection of rotate speed and the feeding mete should be established. The aim of adjusting the rotate speed and controlling flux accurately is achieved by frequency conversion. |
| |
| Keywords: | ANSYS Screw extrusion Finite element method Feeding mete with overfill adding ANSYS |
| 本文献已被 万方数据 等数据库收录！ |
|
