| 57—3C铣床数控改造及分析 |
| |
| 引用本文： | 刘学平,丁苏赤,朱世春.57—3C铣床数控改造及分析[J].机械制造与自动化,1998(4). |
| |
| 作者姓名： | 刘学平 丁苏赤 朱世春 |
| |
| 作者单位： | 合肥工业大学机械系!230009 |
| |
| 摘 要： | 本文根据57—3C铣床的特点,在不改动其主要部件的前提下对其进行了主传动及进给传动的数控改造设计,提高了机床的性能,降低了生产成本及生产周期.
|
| 关 键 词： | 57—3C铣床 数控 改造设计 |
Reformed Design of 57-3C Miller With Numerical Control and Its Analysis |
| |
| Liu,Xueping Ding,Suchi Zhu,Shichun.Reformed Design of 57-3C Miller With Numerical Control and Its Analysis[J].Machine Building & Automation,1998(4). |
| |
| Authors: | Liu Xueping Ding Suchi Zhu Shichun |
| |
| Affiliation: | Hefei University of Technology 230009 |
| |
| Abstract: | The paper presents a reformed design of 57-3C miller with NC. The improvement is emphasized on its main transmission and feed drive without changing its main components. The miller ability has been up-graded, The cost and the production cycle have been reduced. |
| |
| Keywords: | 57-3C miller numerical control reform design |
| 本文献已被 CNKI 等数据库收录！ |
