首页 | 本学科首页   官方微博 | 高级检索  
     

加氢装置高温高压热交换器密封结构性能探析
引用本文:王丽,胡建洲,贺锋,淡勇. 加氢装置高温高压热交换器密封结构性能探析[J]. 石油化工设备, 2011, 40(3): 89-92
作者姓名:王丽  胡建洲  贺锋  淡勇
作者单位:1. 西安北方惠安化学工业有限公司,陕西,西安,710302
2. 陕西延长石油集团有限责任公司,炼化公司,陕西,延安,727406;西北大学,化工学院,陕西,西安,710069
3. 西北大学,化工学院,陕西,西安,710069
摘    要:根据加氢装置操作条件,从密封原理、结构特点、失效原因及经济性评价等方面对加氢装置中常用的高温高压热交换器密封结构进行详细分析.对比分析结果表明,在目前我国加氢装置中,首选Ω环密封和隔膜式密封,其次选用螺纹锁紧环密封,不宜选用八角金属环垫密封.

关 键 词:热交换器  密封结构  高温  高压  分析

Analysis and Discussion of Properties of Sealing Structures for Heat Exchanger Subject to High Temperature and High Pressure in Hydrogenation Unit
WANG Li,HU Jian-zhou,HE Feng,DAN Yong. Analysis and Discussion of Properties of Sealing Structures for Heat Exchanger Subject to High Temperature and High Pressure in Hydrogenation Unit[J]. Petro-Chemical Equipment, 2011, 40(3): 89-92
Authors:WANG Li  HU Jian-zhou  HE Feng  DAN Yong
Affiliation:WANG Li1,HU Jian-zhou2,3,HE Feng1,DAN Yong3(1.Xi'an North Huian Chemical Industry Co.Ltd.,Xi'an 710302,China,2.Refining and Chemical Company,Shanxi Petroleum Group Co.Ltd.,Yan'an 727406,3.Northwest University,Xi'an 710069,China)
Abstract:The seal principle,structural characteristics,failure reasons,and economy of seal structures used in heat exchangers,subject to high temperature and high pressure in hydrogenation unit,were analyzed and discussed according to the operation conditions of hydrogenation unit.The results of analysis and comparison showed that preferred Ω ring seal,diaphragm seals,followed by the selection thread locking ring seal for use,octagonal metallic ring cushion seal is not recommended.
Keywords:heat exchanger  sealing structure  high temperature  high pressure  analysis  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号