| 电连接器外壳冷挤压工艺分析与数值模拟 |
| |
| 引用本文： | 韩帅帅,将定举,黄海波,郑伟刚.电连接器外壳冷挤压工艺分析与数值模拟[J].精密成形工程,2011,3(5):43-46. |
| |
| 作者姓名： | 韩帅帅 将定举 黄海波 郑伟刚 |
| |
| 作者单位： | 贵州大学机械工程学院;贵州师范学院; |
| |
| 基金项目： | 黔科合J字[2011]2217号 |
| |
| 摘 要： | 针对电连接器外壳冷挤压成形工艺的特点，进行数值模拟分析，设计了合理的成形工艺。通过工艺实验论证，结果表明，设计的工艺能保证获得符合图纸要求的电连接器外壳尺寸。
|
| 关 键 词： | 电连接器 工艺方案 模拟分析 镦粗 |
| 收稿时间： | 2011/6/18 0:00:00 |
| 修稿时间： | 2011/9/10 0:00:00 |
Numerical Simulation Analysis and Research on the Cold Extrusion Technology of Electrical Connector Shell |
| |
| HAN Shuai-shuai,JIANG Ding-ju,HUANG Hai-bo and ZHENG Wei-gang.Numerical Simulation Analysis and Research on the Cold Extrusion Technology of Electrical Connector Shell[J].Journal of Netshape Forming Engineering,2011,3(5):43-46. |
| |
| Authors: | HAN Shuai-shuai JIANG Ding-ju HUANG Hai-bo and ZHENG Wei-gang |
| |
| Affiliation: | HAN Shuai-shuai1,JIANG Ding-ju2,HUANG Hai-bo1,ZHENG Wei-gang1(1.College of Mechanical Engineering,Guizhou University,Guiyang 550003,China,2.Guizhou Normal College,China) |
| |
| Abstract: | Aiming at the characteristics of cold extrusion forming technology for the electrical connector shell,the analysis of numerical simulation was made,the process parameters influencing extrusion forming were found out,and the rational forming technology was designed.The results of experiments indicates that the process design ensures the electrical connector shell size,and solves the problem of uneven flow of the metal in the extrusion process,reduces the process experiment cycle.It is of great significance t... |
| |
| Keywords: | electrical connector process scheme simulation and analysis upsetting |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
