ECR plasma etch fabrication of C-doped base InGaAs/InP DHBT structures: A comparison of CH4/H2/Ar vs BCl3/N2 plasma etch chemistries

We compare ECR plasma etch fabrication of self-aligned thin emitter carbondoped base InGaAs/InP DHBT structures using either CH₄/H₂/Ar or BCl₃/N₂ etch chemistries. Detrimental hydrogen passivation of the carbon doping in the base region of our structure during CH₄/H₂/Ar dry etching of the emitter region is observed. Initial conductivity is not recovered with annealing up to a temperature of 500°C. This passivation is not due to damage from the dry etching or from the MOMBE growth process, since DHBT structures which are ECR plasma etched in BCl₃/N₂ have the same electrical characteristics as wet etched controls. It is due to hydrogen implantation from the plasma exposure. This is supported with secondary ion mass spectroscopy profiles of structures which are etched in CH₄/D₂/Ar showing an accumulation of deuterium in the C-doped base region.