首页 | 本学科首页   官方微博 | 高级检索  
     

炭化条件和铁系添加剂对炭分子筛性能的影响
引用本文:徐革联,熊楚安,李成林.炭化条件和铁系添加剂对炭分子筛性能的影响[J].矿产综合利用,2003(1):11-14.
作者姓名:徐革联  熊楚安  李成林
作者单位:1. 中国矿业大学化工与环境工程系,北京,100083;黑龙江科技学院资源与环境工程系,黑龙江,鸡西,158105
2. 黑龙江科技学院资源与环境工程系,黑龙江,鸡西,158105
基金项目:黑龙江科技学院科研基金项目
摘    要:以鸡西烟煤为原料 ,采用炭化法和添加铁系添加剂进行了空气分离生产富氮空气用炭分子筛的制备研究 ,考察了炭化条件和铁系添加剂用量对产品空气分离性能的影响。结果表明 ,鸡西烟煤是制备炭分子筛的优良原料。最佳炭化条件为粘结剂用量 35 % ,升温速度为 10℃ /min,炭化终温为 90 0℃ ,恒温时间为 60 min,铁系添加剂 Fe3O4 的最佳用量为 2 5 .3%。

关 键 词:烟煤  炭分子筛  炭化条件  铁系添加剂
文章编号:1000-6532(2003)01-0011-04
修稿时间:2002年5月23日

The Influence of Carbonization Condition and Iron Series Additives on Carbon Molecular Sieve(CMS) Performance
XU Ge lian ,XONG Chu an ,LI Cheng lin.The Influence of Carbonization Condition and Iron Series Additives on Carbon Molecular Sieve(CMS) Performance[J].Multipurpose Utilization of Mineral Resources,2003(1):11-14.
Authors:XU Ge lian    XONG Chu an  LI Cheng lin
Affiliation:XU Ge lian 1,2,XONG Chu an 2,LI Cheng lin 2
Abstract:A research on preparation of CMS by using Jixi′s bituminous coal as the raw material and addition of iron series additives was done.The influence of carbonization condition and additive dosage on the air separation performance of the CMS products was examined.The results indicate that Jixi bituminous coal is a good raw material for preparation of CMS.The optimum carbonization conditions are:bond dosage 35%,iron additive Fe 3O 4 dosage25.3%,heating rate 10℃/min,keeping constant of temperature 60min and final carbonization temperature 900℃.
Keywords:Bituminous coal  CMS  Carbonization condition  Iron series additive
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号