| 注塑模定模顶出机构设计 |
| |
| 引用本文： | 熊文杰. 注塑模定模顶出机构设计[J]. 模具技术, 2008, 0(1): 31-32 |
| |
| 作者姓名： | 熊文杰 |
| |
| 作者单位： | 佳能大连办公设备有限公司,辽宁,大连,116600 |
| |
| 摘 要： | 针对塑件在定模脱模不良的不同部位，通过相同的工作原理设计不同结构的顶出机构，来解决塑件不同部位在定模中的脱模问题。经生产验证，达到了理想的脱模效果。
|
| 关 键 词： | 注塑模 定模 顶出机构 |
| 文章编号： | 1001-4934（2008）01-0031-02 |
| 收稿时间： | 2007-08-09 |
| 修稿时间： | 2007-08-09 |
Design of ejection device of fixed mold in injection mold |
| |
| XIONG Wen-jie. Design of ejection device of fixed mold in injection mold[J]. Die and Mould Technology, 2008, 0(1): 31-32 |
| |
| Authors: | XIONG Wen-jie |
| |
| Abstract: | By analyzing the part demoulding failures of different positions in the fixed mold, the different structure eiection devices to solve corresponding problems were designed by following the same operating principle. By production, the ideal demoulding effect of was acquired. |
| |
| Keywords: | injection mold fixed mold ejection device |
| 本文献已被 维普 万方数据 等数据库收录！ |
