|
|||||
|
|
| 板坯连铸机粘结漏钢分析及控制 | |
| 引用本文： | 成军,杨治争,王延峰,饶江平,张余.板坯连铸机粘结漏钢分析及控制[J].武钢技术,2012,50(3):13-15,21. |
| 作者姓名： | 成军 杨治争 王延峰 饶江平 张余 |
| 作者单位： | 1. 武钢炼钢总厂,湖北武汉,430083 2. 武汉科技大学铁冶金及资源利用教育部重点实验室,湖北武汉430081／武钢研究院,湖北武汉430080 3. 武钢炼钢总厂,湖北武汉430083／武汉科技大学铁冶金及资源利用教育部重点实验室,湖北武汉430081 |
| 摘 要： | 针对板坯浇铸过程中发生的粘结漏钢事故,从设备状态、保护渣、连铸操作等方面进行分析,认为拉速控制不当是本次事故主要原因,提出相应的预防措施,避免了该类事故的再次发生。 |
| 关 键 词： | 粘结漏钢 结晶器 保护渣 |
Analysis and control of sticking breakout of slab casters |
|
| CHENG Jun,YANG Zhi-zheng,WANG Yan-feng,RAO Jiang-ping,ZHANG Yu.Analysis and control of sticking breakout of slab casters[J].Wisco Technology,2012,50(3):13-15,21. | |
| Authors: | CHENG Jun YANG Zhi-zheng WANG Yan-feng RAO Jiang-ping ZHANG Yu |
| Affiliation: | 1. General Steelmaking Plant of WISCO, Wuhan 430083, China; 2. Key laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education of Wuhan University of Science and Technology, Wuhan 430081, China; 3. Research and Development Center of WISCO, Wuhan 430080, China) |
| Abstract: | In light of the sticking breakout accidents occuring in the process of the slab continuous casting all operating factors concerned including the equipment conditions, mould flux and continuous casting operation are analyzed. It is concluded in the end that the primary cause to the occurrence of the accidents is inappropriate control of the draw- ing speed and to prevent against repeated occurrence of the similar kind of accident counter measures are put forward. |
| Keywords: | sticking breakout influence factor countermeasure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |